[중고계측기] Agilent/HP 11664A ＆ 11664E Detector

 

 

 

 

 

Product description 

 

 

 

 

 

1)HP 11664A

 

The HP/Agilent 11664A Detector is designed for operation with the 8757 / 8756 / 8755 series scalar network analyzers. The 11664A detects the envelope of the 27.8 kHz modulated RF signal to be displayed on the scalar network analyzer. Frequency range of the HP 11664A Detecotr is 100 MHz to 18 GHz.

- Frequency range: 10 MHz to 18 GHz
- Return loss
  10 MHz to 40 MHz: ≥10 dB (≤1.92 SWR)
  40 MHz to 4 GHz: ≥20 dB (≤1.22 SWR)
  4 GHz to 12 GHz: ≥18 dB (≤1.29 SWR)
  12 GHz to 18 GHz: ≥16 dB (≤1.38 SWR)
- Tracking between two 11664 detectors, specified at the same relative power level, not including mismatch or coupler uncertainties
  10 MHz to 8 GHz: <0.5 dB
  8 GHz to 12 GHz: <1.0 dB
  12 GHz to 18 GHz: <1.5 dB
- Input power range: +10 to -50 dBm
- Connectors: Type N (m), with option for APC-7, and special order for Type N (f)
- Nominal input impedance: 50 Ω

 

 

 

 

2)HP 11664E

 

The HP 11664E is a 10 MHz-26.5 GHz APC-3.5 scalar detector. The 11664 series detectors are designed to operate with the 8757, 8756, and 8755 scalar analyzers in ac mode only.

- Frequency range: 10 MHz to 26.5 MHz
- Flatness at -10 dBm
  10 MHz to 18 GHz: ±0.5 dB
  18 GHz to 26.5 GHz: ±1 dB
- Return loss
  10 MHz to 40 MHz: >10 dB (≤1.92 SWR) ≤ +10 dBm
  0.04 GHz to 6 GHz: >20 dB (≤1.22 SWR) ≤ +10 dBm
  6 GHz to 20 GHz: >16 dB (≤1.38 SWR) ≤ +10 dBm
  20 GHz to 26.5 GHz: >12 dB (≤1.67 SWR) ≤ -10 dBm
- Dynamic range depends on scalar network analyzer
  +16 to -60 dBm with 8757A
  +10 to -50 dBm with 8755C/8756A
- Input damage level: +20 dBm (100 mW) RF power 10 Vdc
- Input impedance: 50 Ω nominal
- Standard connector: Precision 3.5 mm male

 

 

 

.전기,전자,통신용 중고계측기 매입/판매합니다.

.Web site : www.coretech21.com

.e_mail : ct9508@naver.com